FX Series PLC User's Manual - Data Communication Edition
Programming Communication
6.1.1
Setting RS-232C or USB, communication port, and transmission speed
The setting procedures for RS-232C/USB, communication port and transmission speed are described below:
For details on GX Developer operating procedure, refer to GX Developer Operating Manual.
1
Displaying the "PC side I/F Serial Setting" window.
Double-click the "Serial" icon
2
Selecting "RS-232C" or "USB"
1. Connection for selecting "RS-232C (include FX-USB-AW/FX
• Connect the PLC to the RS-232C port in the personal computer.
• Connect the PLC to the USB port in the personal computer using the FX-USB-AW or FX
2. Connection for selecting "USB"
• Connect the PLC to the USB port in the personal computer using the transparent function at the USB port
in the GOT1000 Series.
• Connect the standard USB port of the PLC to the USB port of the personal computer. (FX
Caution
For achieving communication using the standard built-in USB port, installation of the USB driver is required.
For the USB driver installation method and procedure, refer to the following manual.
For details on GX Works2 operating procedure, refer to GX Works2 Version 1 Operating Manual
For details on GX Developer operating procedure, refer to GX Developer Operating Manual
H-42
on the Transfer Setup dialog box. The window below appears.
6 Connection Setting for Personal Computer
6.1 Connection Setting (GX Works2)
-USB-BD)"
3U
-USB-BD.
3U
, FX
3S
, FX
)
3G
3GC
(Common).
(Startup).