FX Series PLC User's Manual - Data Communication Edition
Common Items
4. Time at which the settings become valid
1) Specifying the settings using parameters in the programming tool:
When the PLC power is turned ON, the contents of the parameters are automatically transferred to the
PLC.
As soon as the parameters are transferred to the PLC, the settings become valid.
2) Directly specifying the settings in a sequence program:
To enable the settings, write data after turning the PLC mode to RUN from STOP, and then reboot the
PLC's power.
A-66
3 Outline of Communication Setting in the FX Series
3.1 Setting Method