Connection Cables - Mitsubishi Electric FX3U-232-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Inverter Communication
4.3

Connection Cables

4.3.1 10BASE-T cable
10BASE-T cables used in LAN wiring for a personal computer can be connected.
1. Selection procedure when purchasing
1) Cable type
2) Connection specifications
3) Connector
2. Cautions on using commercial cables
Pay attention to the following point when purchasing commercial cables.
• 5V DC is output to the PU connector in the inverters for supplying power to the PU.
It is necessary to cut pins No. 2 and 8 of commercial cables to prevent wiring to pins No. 2 and 8.
(It is recommended to use the distributor BMJ-8-28N).
4.3.2 Twisted pair cable (recommended)
The table below shows recommended model names and manufacturers of cables used in wiring.
Use commercial three-pair type twisted pair cables of 0.3 mm
1. Recommended cable list
Manufacturer
Sumitomo Electric Industries, Ltd.
The Furukawa Electric Co., Ltd.
2. Cable structural drawing (reference)
Three-pair cable structural
drawing example
3. Point of contact
For details on cables such as specifications and price, contact each cable manufacturer.
: 10BASE-T cable (Category 3 or 5)
: Straight type
: RJ45 connector
Model name
DPEV SB 0.3  3P
DPEV SB 0.5  3P
D-KPEV-SB 0.5  3P
2
or more.
Remarks
Three-pair cable of 0.3 mm
Three-pair cable of 0.5 mm
Three-pair cable of 0.5 mm
4 Wiring
4.3 Connection Cables
A
B
C
D
E
2
2
2 F
G
H
I
Apx.A
E-29