How To Setup Modems On The Pc Side For Remote Access - Mitsubishi Electric FX3U-232-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
6. How to Setup Modems on the PC Side for Remote
Access
This chapter explains how to set a modem connected to the personal computer for remote access.
The setting method using GX Works2 and the setting method using FXGP/WIN are explained respectively.
For details on GX Developer operating procedure, refer to GX Developer Operating Manual.
Remote access side
Personal computer
This chapter explains the setting procedure
6.1 Setting Using GX Works2
This section explains the line connection setting method using GX Works2.
6.1.1 Registering AT command for connected modem
This subsection explains how to register the AT command for initializing a modem connected to the personal
computer.
1
Setting the AT command
Select [Tools]  [Set TEL Data/Connect via Modem]  [AT Command Registration] from the menu
bar to display the following dialog box.
I-38
Cable
Modem
for this side.

6 How to Setup Modems on the PC Side for Remote Access

For applicable programming tools, refer to Subsection 1.4.2.
PLC side
Line
general telephone
line, etc.
Modem
The setting procedure for this side is
6.1 Setting Using GX Works2
Cable
PLC
explained in Chapter 5.