Vessel Selection Behavior - Emerson Rosemount 5708 Reference Manual

Reference Manual
00809-0100-4570, Rev DA
7.4.5

Vessel selection behavior

Vessels are displayed in blocks in the main work area. Each vessel is represented by a rectangle with the
following information:
The vessel image containing the material stored using the selected material color at its current

level/distance.
Stored material name and device model.

Empty and full calibration levels represented by orange and red lines respectively.

Level measurements: Average level/distance, maximum level and minimum level/distance, in the

configured measurement units, and volume in percentage. Additional information can be added by
right clicking the vessel. For more information, refer to
A connection status indicator: Note that in the case of a connection failure, the indicator and the entire

background of the rectangle becomes red.
Figure 7-44. Main Work Area
Operation
"Parameters and alerts" on page
Operation
November 2017
152.
85