Table of Contents
Advertisement
Reference Manual
00809-0100-4570, Rev DA
Table D-2. Rosemount LinkPro Technical Specifications
Radio
Spurious emissions
FCC approval
Electromechanical data
Cable entry/plug
Figure D-3. Product Dimensions
3.5
(90)
Dimensions are in inches (mm).
D.4
Mounting
This chapter provides information on mounting the Rosemount LinkPro.
D.4.1
Position
Select an easy-to-reach position for mounting and connecting. Wiring instructions are located on a label
inside the unit's front cover.
Mount the instrument to ensure optimum GSM reception. Do not mount in a closed metallic
box/rack/container. Since the antenna was designed to be internal, the Rosemount LinkPro housing is
made of plastic to enable maximal reception.
D.4.2
Moisture
Use the recommended cables (see
protect the instrument from moisture and penetration of water.
Lead the connection cable downward in front of the cable entry for additional protection. Rain and
condensation water can thus drain off naturally without affecting the connection.
D.4.3
Wall mounting
To mount the Rosemount LinkPro on the wall:
1.
Rosemount LinkPro Operating Instructions
10 (255)
Mark the holes in accordance with the following drilling template.
Rosemount LinkPro Operating Instructions
EN 301 511 V9.0.2
FCC 47 CFR part15:2007, subpart B, class A
cable gland M20 x 1.5 (cable ø 8mm to13mm)
2
Selecting connection cable page
7 (180)
173) and tighten the cable gland to
November 2017
170
Advertisement
Table of Contents
