Table of Contents
Advertisement
Service and Troubleshooting
November 2017
Figure 9-4. Alert Threshold
To define the alert thresholds:
1. Check the relevant option (or both). An unchecked option does not generate an alert for this vessel.
2. Set the value in volume percent where an alert should be generated above this value (maximum) or
below this value (minimum).
3. Once set, an alert is generated when the material volume exceeds the maximum value set or drops
below the minimum value set.
9.7.4
General tab
Set the number of sections on X axis and the number of sections on Y axis. The total number of sections
is equal to X * Y and limited to 99 sections. Set the number of sections to 1 in order to deactivate this
feature.
Figure 9-5. Section settings
154
Reference Manual
00809-0100-4570, Rev DA
Service and Troubleshooting
Advertisement
Table of Contents
