Table of Contents
Advertisement
Operation
November 2017
7.3
First-time running
The following steps are required to set a single vessel:
1. Creating a new project (see
2. Vessel configuration (see
3. Advanced parameters (see
4. Echo curve analysis (see
5. False echo mapping (see
6. Vessel properties configuration (see
These steps are basic and mandatory for the completion of a vessel commissioning.
For additional changes and modifications of the vessel and for the Rosemount 3DVision Software, refer
to the various software menus starting on
7.3.1
Creating a new project
Following a successful login, the software automatically opens the last project. If no project exists, create
a new project by selecting the New Project icon in the center of the screen or by selecting File > New...
or by importing a saved project by selecting File > Import Project to Server....
Figure 7-5. New and Open Project Buttons
54
page
54).
page
58).
page
62).
page
62).
page
62).
page
62).
page
66.
Reference Manual
00809-0100-4570, Rev DA
Operation
Advertisement
Table of Contents
