Table of Contents
Advertisement
Reference Manual
00809-0100-4570, Rev DA
Advanced tab
Figure 7-58. Advanced Parameters - Advanced Tab
Angle Adapter: In case the antennas are installed in an angle with a Rosemount angle adapter or with
other mechanical solution it is required to adjust the angle in the configuration. By default, the angle is
set to 0°, maximal value is 30°.
Side Margins [m/ft]: Allows tolerance in echo recognition to vessel walls (see figure). Used for creating a
tolerance in case of unknown vessel width/diameter, and when a tolerance is required for detecting
points on the vessel walls
Echo within the tolerance/margin range is transformed to the vessel wall on the X-Y plane and will not be
eliminated in calculation. Default: 1m (3.28 ft.).
Bottom Margins [m/ft]: Allows adding a tolerance in echo recognition from the bottom shape (see
figure). This feature is used for creating a tolerance in the case of unknown vessel dimensions, and when
a tolerance is required for detecting points from the bottom of the vessel. Default: 1 m (3.28 ft.)
Restrain Coefficient [%]: Sets the level of preference of echoes from shorter distances over echoes from
farther distances. 100% = no preference of closer echoes. 0% = total preference of the first echo. Default:
10%.
User False Echoes: Enable/Disable, Sets the algorithm to consider the false echo mapping created
manually by the user (enabled by default). Setting this parameter to Disable causes the device to ignore
the manual false echoes.
Auto False Echoes: Enable/Disable, Sets the algorithm to automatically calculate false echo levels
(enabled by default). Setting this parameter to Disable stops the device from continuously calculating
the false echo levels and keeps the last image of false echoes. If the false echoes are manually reset, the
level is set to 0.
Operation
Operation
November 2017
99
Advertisement
Table of Contents
