Table of Contents
Advertisement
Reference Manual
00809-0100-4570, Rev DA
Edit menu
The Edit menu includes the following options:
Figure 7-23. Edit Menu
Table 7-3. Edit Menu
Option
Add
Delete
Properties
Edit
Save Selected Vessel Configuration As...
Load Vessel Configuration OnLine...
OffLine Configuration
Operation
►
Site
Vessel
Scanner
►
Site
Vessel
Scanner
►
Site
Vessel
Vessel graphic figures
Project...
►
Manual Load to Selected Vessel...
Cancel Manual Load from All Vessels
Browse to Vessel AutoSaved File
Folder...
Description
Add sites, vessels, or devices depending on the level selected in
the project pane.
On the site level it adds sites or vessels.
On the vessel level it adds devices.
On the device level it is disabled.
Delete sites, vessels, or devices depending on the level selected
in the project pane.
On the site level it deletes sites.
On the vessel level it deletes vessels.
On the device level it deletes devices.
Set a name and description to a site or a vessel
On the site level define the name and description of the site.
On the vessel level define the name and description of the vessel.
Additional option (only available when a vessel is selected): Add
text labels on the 3D visualization (X, Y, and Z coordinates are
referenced to the center axis located at the bottom center of the
vessel).
An interface option to rearrange the vessels and sites per
requirements.
This operation saves the selected vessel configuration into an
XML file for maintenance and support issues.
This operation uploads a saved XML file with the vessel
configuration into the project that is running online.
When in Offline mode there are options to work on existing
project.
This operation loads parameters manually when the software is
offline and not connected to devices.
This operations cancels manual load from all the vessels in the
project.
This operation opens a window within the folder with all the
saved configuration XML files.
Operation
November 2017
69
Advertisement
Table of Contents
