Table of Contents
Advertisement
Reference Manual
00809-0100-4570, Rev DA
10. Configure each Rosemount 5708 set for the vessel by selecting them from the device selection list
and entering their communication parameters.
11. Once all devices are configured, connect to all the devices in the vessel by right-clicking the vessel
name and selecting the Connect option from the drop-down menu.
12. When a connection is established, select the site from the site selection bar (as shown to the right).
The vessel profile screen appears with the results of the scanned measurements.
13. To view a 3-dimensional profile, right-click on a vessel in the main work area and select Show 3D
visualization from the drop-down menu. The profile window opens
Figure 7-18. Product 3-Dimensional Profile
Note
When connecting to the Rosemount 5708S, the 3D visualization of the product in the vessel is available
by double-clicking the vessel.
For further information on the 3D visualization, refer to
Operation
(Figure
7-18).
"3D visualization" on page
Operation
November 2017
128.
65
Advertisement
Table of Contents
