Site Preparations - Emerson Rosemount 5708 Reference Manual

Reference Manual
00809-0100-4570, Rev DA
Make sure there is no obstacle below the Rosemount 5708.

In the case of standpipe mounting, assemble and position the Rosemount 5708 at a height that leaves

at least 0.4-in. (10 mm) below the standpipe for the antenna end to protrude.
3.2.4

Site preparations

Prior to installation, complete and verify the site preparations described in this section. For optimal
installation, ensure the Rosemount 5708 can be positioned and fitted according to the guidelines in
"Mounting location" on page
Mechanical Installation
Minimum 0.4-in. (10 mm)
for standpipe mounting
12.
Mechanical Installation
November 2017
13