Table of Contents
Advertisement
Rosemount LinkPro Operating Instructions
November 2017
D.6.3
Configure APN details
To configure the modem parameters:
1. In the Modem Details area, enter the COM port number in the Comport field (this field is mandatory).
2. In the APN field (this field is mandatory), enter the APN.
3. Enter the UserID and Password if required by the cellular network provider.
4. Select Set APN! to store the user ID and password in the modem. A confirmation window appears.
Figure D-10. Confirm APN Details
5. Select Yes to set the details in the modem. The Test Completion window appears
D.6.4
Configure mode of operation
To configure the operation mode:
1. In the Configuration menu, select the relevant mode in accordance with the following tables. A
confirmation window appears
Table D-3. EZ-864 modes
Mode
Mode 0
Mode 1
Mode 2
Mode 3
Table D-4. GSM1318 modes
Mode
Mode 0
Mode 1
Mode 2
Mode 3
Note
Mode 0 (automatic band detection) is recommended for GSM1318.
177
(Figure
D-11).
Modem band
GSM 900MHZ + DCS 1800MHZ
GSM 850MHZ + PCS 1900MHZ
GSM 850MHZ + PCS 1900MHZ
GSM 900MHZ + PCS 1900MHZ
Modem band
Automatic
GSM 900MHZ + DCS 1800MHZ
GSM 850MHZ + PCS 1900MHZ
GSM 900MHZ + PCS 1900MHZ
Reference Manual
00809-0100-4570, Rev DA
(Figure
Region
Europe/Israel
USA - AT&T and MNV0
USA - T mobile & MNV0
Mexico
Region
Global
Europe/Israel
USA
Mexico
Rosemount LinkPro Operating Instructions
D-9).
Advertisement
Table of Contents
