Reference Manual
00809-0100-4570, Rev DA
4. Replace the nut and tighten it over the neck tube to the mounting plate.
5. Lower the antenna and mounting plate into the fitting location on the silo.
6. Bolt the mounting plate onto the flange of the silo.
Step 3: Rotate antenna toward silo center
1. Slightly loosen the nut that connects the antenna with the mounting plate.
2. Rotate the antenna. The notch on the top of the thread must be directed toward the center of the
silo.
3. Tighten nut.
Mechanical Installation
Mechanical Installation
November 2017
19