Enter Your Call Sign (My) Into The Transceiver - Icom IC-9700 Advanced Manual

9. D-STAR OPERATION (BASIC)

Enter your call sign (MY) into the transceiver

To operate D-STAR, you must first enter your call sign
into the MY call sign memory. You can enter up to 6
MY call signs.
NOTE: Your MY call sign must match the call sign
registered on a gateway repeater. (p. 9-4)
Example: Enter "JA3YUA" as your own call sign into "1."
1. Open the MY CALL SIGN screen.
» SET > My Station > My Call Sign (DV)
MENU
2. Touch the number for 1 second.
3. Touch "Edit."
4. Enter your own call sign, then touch [ENT].
5. Touch the entered call sign.
• Sets the call sign to be used as MY call sign.
6. To close the MY STATION screen, push
several times.
TIP: You can enter a note of up to 4 characters,
such as the model of the transceiver, name, area
name, after your call sign.
9-3
EXIT