RECORDING A qSO ONTO A microSD CARD
■ About the microSD card
The microSD and microSDHC cards are not available from
Icom. Purchase separately.
A microSD card of up to 2 GB, or an microSDHC of up to 32
GB, can be used with the ID-51A/E.
Icom has checked the compatibility with the following mi-
croSD and microSDHC cards.
Brand
Type
microSD
SanDisk
®
microSDHC
• The performance of the cards listed above is not guaran-
teed.
• Throughout the rest of this document, the microSD card and
an microSDHC card are simply called microSD cards.
• Icom recommends that you format all microSD cards to be
used with the transceiver, even preformatted microSD cards
for PCs or other uses.
(As of August 2014)
Memory size
2 GB
4 GB
8 GB
16 GB
32 GB
NOTE:
• Before using the microSD card, read the instructions of the
microSD card thoroughly.
• If you do any of the following, the microSD card data may
be corrupted or deleted.
- You remove the microSD card from the transceiver while
accessing the microSD card.
- You change the external power supply's voltage while
accessing the microSD card.
- You start the vehicle engine while accessing the mi-
croSD card.
- You drop, impact or vibrate the microSD card.
• Do not touch the contacts of the microSD card.
• The transceiver takes a longer time to recognize a high
capacity microSD card.
• The microSD card will get warm if used continuously for a
long period of time.
• The microSD card has a certain lifetime, so data reading
or writing may not be possible after using it for a long time
period.
• When reading or writing data is impossible, the microSD
card's lifetime has ended. In this case, purchase a new
one. We recommend you make a backup file of the impor-
tant data onto your PC.
• Icom will not be responsible for any damage caused by
data corruption of an microSD card.
7
7
72
Need help?
Do you have a question about the ID-51A and is the answer not in the manual?
Questions and answers