Xilinx KC705 User Manual page 110

7. Connect the ATX power supply to the KC705 board using the ATX power supply adapter
cable as shown in
a. Plug the 6-pin 2 x 3 Molex connector on the adapter cable into J49 on the KC705
board.
b. Plug the 4-pin 1 x 4 peripheral power connector from the ATX power supply into the
4-pin adapter cable connector.
8. Slide the KC705 board power switch SW12 to the ON position. The PC can now be
powered on.
KC705 Evaluation Board
UG810 (v1.8) March 20, 2018
Figure D-1:
www.xilinx.com
Appendix D: Board Setup
110
Send Feedback