Navigation And Special Keys; Cli Error Messages - Proxim ORiNOCO AP-700 User Giude

Command Line Interface (CLI)
General Notes
• Download vs. Upload - Downloads transfer files to the Access Point. Uploads transfer files from the Access Point. The
TFTP server performs file transfers in both directions.
• Group - A logical collection of network parameter information. For example, the System Group is composed of several
related parameters. Groups can also contain Tables. All items for a given Group can be displayed with a show
<Group> CLI Command.
• Image File - The Access Point software executed from RAM. To update an Access Point you typically download a new
Image File. This file is often referred to as the "AP Image".
• Parameter - A fundamental network value that can be displayed and may be changeable. For example, the Access
Point must have a unique IP Address and the Wireless interface must be assigned an SSID. Change parameters with
the CLI set Command, and view them with the CLI show Command.
• Table - Tables hold parameters for several related items. For example, you can add several potential managers to the
SNMP Table. All items for a given Table can be displayed with a show <Table> CLI Command.
• TFTP - Refers to the TFTP Server, used for file transfers.

Navigation and Special Keys

This CLI supports the following navigation and special key functions to move the cursor along the prompt line.
Key Combination
Delete or Backspace
Ctrl-A
Ctrl-E
Ctrl-F
Ctrl-B
Ctrl-D
Ctrl-U
Ctrl-P
Ctrl-N
Tab
?

CLI Error Messages

The following table describes the error messages associated with improper inputs or expected CLI behavior.
Error Message
Syntax Error
Invalid Command
Invalid Parameter Name
Invalid Parameter Value
Invalid Table Index
Invalid Table Parameter
Invalid Table Parameter Value An invalid table parameter value has been entered at the command prompt.
Read Only Parameter
Incorrect Password
Download Unsuccessful
Upload Unsuccessful
Operation
Delete previous character
Move cursor to beginning of line
Move cursor to end of line
Move cursor forward one character
Move cursor back one character
Delete the character the cursor is on
Delete all text to left of cursor
Go to the previous line in the history buffer
Go to the next line in the history buffer
Complete the command line
List available commands
Invalid syntax entered at the command prompt.
A non-existent command has been entered at the command prompt.
An invalid parameter name has been entered at the command prompt.
An invalid parameter value has been entered at the command prompt.
An invalid table index has been entered at the command prompt.
An invalid table parameter has been entered at the command prompt.
User is attempting to configure a read-only parameter.
An incorrect password has been entered in the CLI login prompt.
The download operation has failed due to incorrect TFTP server IP Address or file
name.
The upload operation has failed due to incorrect TFTP server IP Address or file
name.
Description
AP-700 User Guide
148