Table of Contents
Advertisement
2. A bluetooth permission pop-up appears on the screen. Tap Yes and then tap OK to turn ON buletooth. This will
initiate the scanning process. After scanning, a screen appears as below showing the available Proxim devices.
3. Tap on a device from the scanned list that you want to connect with.
4. A pop-up with bluetooth pairing request appears on the screen. Enter the PIN and then tap OK. The default PIN is
123456.
5. This may take upto few seconds to connect and load the data from the device. After loading the data successfully, the
link status screen appears.
Connect using QR scan feature
1. Tap QR Scan on the home screen. A pop-up appears on the screen asking permission to take pictures and record
videos. Tap Allow.
2. Point your phone's camera to the QR code on the device to capture it.
3. This may take upto few seconds to connect and load the data from the device. After successfully loading the data, the
link status screen appears. See the Link status screen section below.
:
If you see "Please Wait Connecting..." screen for longer than usual while trying to connect a device, go to your
mobile bluetooth settings and then select "Forget device" option for that device ID. Perform re-scan in BlueConnect
App to connect with the device.
Make sure to connect only to BlueConnect app and disconnect all other bluetooth devices for better performance.
2.1.6 Link status screen
After you connect with a device, you can access the Link Details and Link Quality on the Link Status Screen. The link
status screen contains the following features. See figure below.
•
Default passwords
•
Settings
•
Disconnect
•
Rescan
•
Link details tab
•
Link quality tab
•
Side menu
•
SU and BSU details
•
RSSI indicator
Device Management Guide
Proxim Blue Connect
12
Advertisement
Table of Contents
