Sharp MX-3610N User Manual page 1240

TROUBLESHOOTING
CANNOT WRITE TO THE USB MEMORY DEVICE (WHEN USING
USB MEMORY SCAN)
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
then turn the main power switch to the "
changes from orange to green, press the [POWER] button.
When the background colour of the job status display at the upper right corner of
the touch panel is not grey, do not switch off the main power switch or unplug the
power plug. This may damage the hard drive or cause the data being stored or
received to be lost.
Point to check
Is the connected USB device recognized
correctly?
Index
"position. Wait at least 10 seconds and
"position. After the main power indicator colour
Solution
Use [USB-Device Check] in the
setting mode to check whether or not
the device is recognized.
"Setting mode" → [System Settings] → [USB-
Device Check]
If it is not recognized, connect it once again.
Contents
MX-2610N / MX-3110N / MX-3610N