Hydraulic oil filter - Replace
1. Follow Machine safety position. (Refer Engine - Safety
rules)
2. Clean top portion of the tank.
3. Remove breather (1) with a special tool to release pres-
sure inside tank.
4. Dismantle bolts and nuts (2) of the top cover (3) of filter
assembly and remove the top cover.
NOTE: Ensure that sensor & O-ring do not get damaged.
5. Clean magnets on inner surface of this top cover.
6. Remove the spring from filter assembly.
7. Remove the filter and separate the cap from it.
8. Take a new filter and fit the cap on it.
9. Put the filter inside the filter assembly.
10. Install spring on it.
11. Install top cover with the O-ring and bolts and nuts.
12. Install breather (1) with a special tool.
7 - MAINTENANCE
7-46
1
PTIL12TLB0457AB
2
PTIL12TLB0551AB