Restriction Indicator– Check - Case 570T Operator's Manual

Restriction Indicator– Check
1. Move the machine to a level and firm ground.
2. Raise the loader attachment and install the safety sup-
port strut.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Ensure the direction-of-travel lever and gearshift lever
are in neutral position.
5. Engage the parking brake.
6. Stop the engine and remove the key.
7. Visually inspect the restriction indicator (1) mounted on
the intake hose.
8. Check if any red coloured band is surrounding the
spring within the indicator.
9. If red coloured band is visible then clean the air filter as
described in "As Required".
NOTE: Wait until the machine components attain normal temperature before proceeding to clean the air filter.
7 - MAINTENANCE
7-22
1
PTIL12TLB0448AB