Intended Use - Case 570T Operator's Manual

Intended use

This machine has been built with the most advanced technology and in accordance with recognized safety rules. The
machine must be used according to its intended use only, respecting the safety, precautions and operating instruc-
tions. Any functional disorders, especially those affecting the safety of the machine, should therefore be rectified
immediately.
WARNING
Avoid injury!
Using the machine for purposes other than or beyond the intended use is not allowed; for example:
- for the transportation of persons,
- as a working platform,
- for pulling attached loads,
- for pulling or transporting loads without the intended working equipment.
Failure to comply could result in death or serious injury.
The manufacturer/supplier cannot be held responsible for any damage resulting from unintended use. The risk in-
volved in such misuse lies entirely with the user.
NOTE: For clarity, some figures in this manual show the machine with protection panels or covers removed. Never
operate the machine with any protection panels or covers removed.
NOTICE: It is absolutely forbidden to tamper with and/or change the setting of any of the hydraulic system valves to
avoid damaging machine components, with a consequent risk of personal safety.
The current operator's manual is the user's guide for correct run-in, use and maintenance of the machine. Carefully
read this operator's manual and store it in the cab for quick reference. Instructions concerning safety, operation and
maintenance have been developed to permit safe service and operation of this machine.
In the event of queries or suggestions relevant to your machine do not hesitate to address to your CASE Dealer.
CASE Dealers have qualified and trained personnel at disposal along with original spares, means and equipment
suitable to carry out all necessary maintenance.
Any modifications or adaptations which are not approved by the manufacturer may invalidate the machine's original
conformity with safety requirements.
NOTICE: The engine and fuel system on your machine are designed and built to government emissions standards.
Tampering by CASE Dealers/customers/operators/users are strictly prohibited by law. Failure to comply with this
prohibition could result in government fines, rework charges, invalid warranty, legal action and possible confiscation
of the machine until rework to original condition is completed. Engine service and/or repairs must be carried out by a
certified technician only.
Before entrusting this machine to an operator, make sure that:
• The operator is qualified to operate the machine correctly and safely.
• The operator has read and completely understood the instructions given in this manual.
Consult your CASE Dealer to obtain any other technical manuals or manuals in other languages.
Your CASE Dealer is at your disposal for any further information you may need.
Spare parts
The "non-genuine" spare parts have not been checked and authorized by the manufacturer. The assembly and/or
use of such products may have negative effects on the machine design features and could impair its operation safety.
The manufacturer is not liable for any damage caused by "non-genuine" spare parts or accessories.
Warranty
The warranty applicable for each model 570T Backhoe Loader manufactured by Case New Holland Construction
Equipment (India) Pvt. Ltd. (the company) will be as given under:
1. Each backhoe loader (equipment) manufactured by the Company/ CASE Dealer shall be devoid of defects in
material and workmanship.
1 - GENERAL INFORMATION
1-3
W1142B