Commissioning The Machine - Case 570T Operator's Manual

4 - OPERATING INSTRUCTIONS
4 - OPERATING INSTRUCTIONS###_4_###
COMMISSIONING THE UNIT

Commissioning the machine

NOTICE: Read and familiarize yourself with the instructions and warnings shown in this manual before operating the
machine.
Before using the machine, some precautions are necessary. Check the levels (engine oil, hydraulic fluid and coolant
fluid) and make sure that the various fluids correspond to the conditions of use. Carry out the daily maintenance
operations. Walk round the machine, look for any leaks and inspect the hoses. Tighten or replace any items as
required.
Before undertaking road travel, unlock the attachments, completely raise the stabilizers and install the safety systems
required by the regulations. Before road travel or night work, check that the lighting and signaling systems are cor-
rectly operating and correctly adjusted. Check the condition of the tyres and the tyre pressure. Clean the steps and
access handles. The presence of oil, mud or ice (winter) can cause accidents. Make sure they are always clean.
Clean or replace safety decals which are no longer legible.
Make sure that the engine guard is closed and latched correctly. Remove anything which might hinder visibility. Clean
the windows and the rear view mirrors. Make sure that no objects or tools are left on the machine or in the operator's
compartment. Make sure you know how to evacuate the machine (emergency exit via the right-hand door) in case exit
through the left-hand door is not possible. Make sure that the right-hand door is not locked. Make sure that nobody
is under or on the machine. The operator should be the only person on the machine. Make sure that nobody is within
the working range of the machine.
4-1