Radiator and oil cooler fin - Cleaning
1. Follow Machine safety position. (Refer Engine - Safety
rules)
2. Raise the loader and put safety strut.
3. Remove the front grille.
4. Unscrew the fixing screw and remove the intercooler.
5. Clean the intercooler (3) and radiator (4) using:
A. Compressed air with a pressure lower than 7.0 bar
(101.5 psi) to remove dry dust.
B. Water jet to remove mud.
C. A detergent-based solution, preferably applied
with a low-pressure cleaner, to remove oily dust.
6. Make sure all dirt and debris have been removed es-
pecially in the area between the radiator and the inter-
cooler.
7. Reassemble the intercooler (3) and related piping.
8. Reassemble the front grille.
9. Remove the safety support strut and lower the loader
attachment.
7 - MAINTENANCE
7-57
1
PTIL12TLB0204AB