Case 570T Operator's Manual page 160

3. Insert & count the number of shims (4) in step cre-
ated between sleeve locking (3) & welded boss (6) in
pressed condition as shown in figure.
4. Add one more shim (4) to the number of shims (4) count
in Step 3 to front of cover sleeve locking (3).
5. Place the remaining shims (4) on back of cover sleeve
locking (3).
6. Assemble the whole arrangement inside the hole &
tight it through 4 numbers M10 bolts (1) & conical wash-
ers (2).
7. Follow the same procedure for the other location also.
Follow the same procedure whenever do the setting for
stabilizers.
7 - MAINTENANCE
7-38
3
PTIL12TLB0485AB
4
PTIL12TLB0484AB
5
PTIL12TLB0487AA