Safety Instructions - Case 570T Operator's Manual

7 - MAINTENANCE

Safety instructions

Perform checks and maintenance operations only after
reading and learning the instructions and the warnings
contained in this manual.
NOTE: There is a risk of serious injury if maintenance or
repairs are not performed correctly. If you do not under-
stand the maintenance procedures, consult your CASE
Dealer.
Make sure you know the position and function of every
control. Operating the controls wrongly can cause seri-
ous physical injury. Any modification to this machine with-
out prior authorization could cause serious injury. Do not
make any modifications without authorization. Consult
1
PTIL12TLB0174AA
your CASE Dealer. Carefully observe the maintenance
intervals indicated in this manual.
NOTICE: If you use the machine under particularly se-
vere conditions (dusty or corrosive atmosphere, etc.), the
maintenance intervals should be reduced.
Before performing any operation on the machine, wear
tight clothes and personal safety devices appropriate for
the operation to be carried out:
• Safety helmet
• Safety shoes
• Heavy gloves
• Reflective clothing
• Wet weather clothing
If the environment conditions make it necessary, the
following personal safety equipment should be at hand:
• Respirators (or dust proof masks)
• Ear plugs or acoustic ears protections
• Goggles with lateral shield or masks for eyes protection
Before performing any maintenance operation, wait for
the engine and all hydraulic systems and components to
cool down. Clean the grease fittings before lubrication.
Before filling oil, clean the area around plugs and necks.
Prevent that dust or dirt from entering the hydraulic sys-
tems or components.
7-8