Loader Attachment Controls - Case 570T Operator's Manual

LOADER ATTACHMENT CONTROLS

Loader attachment controls
WARNING
Misuse hazard!
Before starting the engine, make sure you are
fully aware of the location and the function of
each control.
Failure to comply could result in death or se-
rious injury.
NOTICE: Before using the controls make sure that the op-
erator's seat is correctly adjusted in the loader attachment
position.
With standard loader bucket
Located on the right of the steering wheel, this seven posi-
tion lever operates all the loader attachment controls. The
speed of movement of each control depends on the angle
to which the lever is tilted. In the intermediate position,
two movements can be obtained simultaneously.
With bottom dump bucket (optional)
Located next to the loader bucket control lever.
dumping and loading operation are performed with this
lever more effectively. Single touch opening and closing
of the loader bucket , reduces operators fatigue resulting
in enhanced productivity.
3 - CONTROLS AND INSTRUMENTS
W0226A
The
3-21