Access To Operator's Platform - Case 570T Operator's Manual

3 - CONTROLS AND

ACCESS TO OPERATOR'S PLATFORM

Access to operator's platform
Use the steps (1) and access handles (2) when entering
or leaving the operator's compartment.
CAUTION
Fall hazard!
When entering or exiting the cab, never use
the control levers as handholds.
mount and dismount the machine in a safe
way. Maintain a three-point contact with
steps, ladders, and/or handholds.
Failure to comply could result in minor or
moderate injury.
WARNING
Fall hazard!
Clean the steps and access handles to remove
all traces of grease, oil, mud, and ice (in win-
ter).
Failure to comply could result in death or se-
rious injury.
Doors
To open the doors from the outside, push the lock (1) fully
and simultaneously pull the handle (2). Lift the handle (3)
to open the doors from the inside.
NOTICE: Use the left-hand door for entering or leaving the
operator's compartment. Use the right-hand door only in
case of an emergency.
WARNING
Moving parts!
Make sure all entry and mechanical access
doors are properly closed before operating the
machine.
Failure to comply could result in death or se-
rious injury.
NOTE: Use the starter switch key to lock the doors.
3 - CONTROLS AND INSTRUMENTS
INSTRUMENTS###_3_###
Always
C0075B
W0139A
W0238A
3-1
1
PTIL14TLB0015AB
2
PTIL14TLB0016AB