Wheels Re-Torque - Case 570T Operator's Manual

EVERY 100 HOURS

Wheels re-torque

1. Move the machine to a level and firm ground.
2. Lower the loader attachment to the ground.
3. Place the backhoe attachment in the road travel posi-
tion.
4. Place the direction-of-travel lever and gearshift lever in
neutral position.
5. Immobilize the machine by means of the parking brake.
6. Stop the engine and remove the starter key.
7. Check the tightening torque of the nuts (1) fastening
the wheels.
Front wheel nuts - 196 N·m (145 lb ft)
Rear wheel nuts - 490 N·m (361 lb ft)
7 - MAINTENANCE
7-29
1
PTIL12TLB0190AB