Mud Filter - Change - Case 570T Operator's Manual

Mud filter - Change

1. Follow Machine safety position. (Refer Engine - Safety
rules)
2. Open and raise the engine tilt hood
3. Place a container with suitable capacity under the filter.
4. Hold the primer (2) and loosen the breather screw (1).
5. Unscrew and remove the cartridge.
6. Apply a thin layer of clean oil on the seal (2) of the new
cartridge.
NOTE: Do not use non genuine spare parts. Injection
pump may get damaged by using a in genuine filter.
7. Assemble the new cartridge.
8. Manually screw in the cartridge until the seal touches
the filter head.
9. Tighten further by 3/4 of a turn.
NOTE: Over tightening can damage the filter seal (2).
10. Bleed the fuel system.
7 - MAINTENANCE
7-41
1
PTIL12TLB0235AB
2
PTIL12TLB0231AB