Front Axle - Hub Greasing 2Wd - Case 570T Operator's Manual

Front axle - Hub greasing 2WD

1. Follow Machine safety position. (Refer Engine - Safety
rules)
2. Support the vehicle and remove front wheel.
3. Open the plug (1) and the cover (2).
4. Fill grease in the hole (1) until the excess grease purges
from the bearing rollers.
5. Install the cover (2) and the plug (1).Tighten it to a
torque of 20 - 30 N·m (15 - 22 lb ft).
7 - MAINTENANCE
7-51
1
PTIL13TLB0732AA
2
PTIL12TLB0557AB
3
PTIL12TLB0556AB
4
PTIL12TLB0557AB