Booms, Dippers, And Buckets - Control Identification - Case 570T Operator's Manual

BACKHOE ATTACHMENT CONTROLS

Booms, dippers, and buckets - Control identification

NOTICE: Before using the backhoe attachment, make sure the stabilizers are completely lowered.
Backhoe boom and backhoe attachment left-hand control lever
The lever has five positions:
Position "0": Neutral/hold. This position enables the attachment movement to be stopped. As soon as the lever is
released, it automatically returns to the neutral position "0" and the attachment remains in the position where it was
when movement stopped.
Position "A": Swing LEFT - RIGHT.
Position "B": Swing RIGHT - LEFT.
Position "C": Dipper EXTEND.
Position "D": Dipper RETRACT.
Backhoe dipper and backhoe attachment right-hand control lever
The lever has five positions:
Position "0": Neutral/hold. This position enables the attachment movement to be stopped. As soon as the lever is
released, it automatically returns to the neutral position "0" and the attachment remains in the position where it was
when movement stopped.
Position "E": Bucket CURL IN.
Position "F": Bucket DUMP.
Position "G": Boom DOWN.
Position "H": Boom UP.
Slider frame control
Press and hold the pedal (1) to unlock the slider frame and using a combination of both the control levers, move the
slider on the "H" frame.
3 - CONTROLS AND INSTRUMENTS
3-27