Transmission Controls - Case 570T Operator's Manual

Transmission controls

Power-Shuttle
1. Gearshift lever: It is possible to select four forward and
four reverse travel gears.
2. Transmission disconnect button (on gearshift lever):
Prior to changing gear press and hold down this switch
which disengages transmission drive, select the re-
quired gear with the gearshift lever and release the
switch to reengage drive.
3. Direction lever: The movement of this lever from the
neutral position will engage the forward or reverse
travel.
NOTE: In reverse gear a reverse buzzer sounds. Also
the warning lights are "ON" in the tail lamp.
4. Horn button.
A device for "transmission disconnection" is activated by
pushing button (2), placed on the gearshift lever (1).
NOTICE: Always apply the parking brake whenever the
machine is parked as the machine is free to roll even
though the transmission gearshift lever may be "In Gear"
and the engine is turned "OFF".
Gearshift lever
The single gearshift lever (1) is used to select any of the
four gear ratios. The transmission disconnect button (2) is
depressed and held as the lever is shifted from one gear
to another and then released to re-connect transmission
drive.
3 - CONTROLS AND INSTRUMENTS
3-9
1
PTIL14TLB0223AB
2
PTIL14TLB0224AB
3
PTIL14TLB0225AB