Instrument Cluster - Case 570T Operator's Manual

Instrument cluster

1. 4WD switch (If equipped)
Engage 4WD by pressing this switch.
2. Cabin fan switch
3. Rear work lights
Switch "ON" the rear work light with this switch.
4. Brake oil level low warning lamp (Red Color)
Turns "ON" when brake oil level is low. When this light is On, stop the vehicle and fill the brake fluid reservoir to
the recommended level.
5. Engine oil pressure warning lamp (Red Color)
This warning lamp turns "ON" and the audible warning device sounds when the engine oil pressure is too low.
6. Battery charge warning lamp (Red Color)
This warning lamp turns "ON" when the alternator/fan belt is broken or when the alternator is not charging the
battery.
7. Parking brake warning lamp (red color)
This indicator lamp turns "ON" when the parking brake is engaged.
8. Position lamp (Green color)
Turns "ON" when parking lamp is On.
9. Hydraulic filter restriction lamp (Red color)
Turns "ON" when there is a restriction in the hydraulic filter obstructing the flow of oil.
10. Transmission oil temperature lamp (Red color)
Turns "ON" when the transmission oil temperature becomes high. If this turns "ON" then stop all working of the
loader and backhoe. DO NOT SWITCH OFF THE ENGINE. Let the engine idle till the light goes "OFF". You can
proceed once it is "OFF". If it occurs frequently then contact your CASE Dealer.
11. High beam indicator (Blue color)
Turns "ON" when the head lamp is in high beam mode.
3 - CONTROLS AND INSTRUMENTS
PTIL14TLB0068FB
3-16
1