Communicating By Serial Port - Symmetricom SSU-2000e User Manual

Table 3-1. Communications Port Assignments (Continued)
Port #
23 This port is user selectable as either an ICS or a TL1
interface. The port defaults to ICS upon initialization
123 This port is designated for NTP only
161 This port is designated for SNMP Interactive
162 This port is designated for SNMP Trap transmission
2000 This port is designated for TL1 only

Communicating by Serial Port

Three EIA-232-C ports are available on the SSU-2000e. Attach a PC with terminal
emulation software to one of the ports as shown in
connection to the local port on the front of the Communications module).
Figure 3-1. Direct Connection Using the Serial Port
12713140-002-2 Revision E – October 2006
Chapter 3 Provisioning and Operating the SSU-2000e
Establishing a Connection With the SSU-2000e
Function
Ethernet Ports (Telnet)
Protocol
ICS (Default), TL1
NTP
SNMP Interactive
SNMP Trap
TL1
Figure 3-1 (this example shows a
SSU-2000e User's Guide 91