Adding Users - Symmetricom SSU-2000e User Manual

Chapter 3 Provisioning and Operating the SSU-2000e

Adding Users

5. Enter a "username" and press Enter. The name you enter will be the log-in name
for the system administrator. You can use up to 20 characters for the user name.
The system prompts you for a password.
6. Enter a "password" and press Enter. Passwords must have at least one
alphanumeric, one numeric, and one special (punctuation, for example)
character. The password can be up to 10 characters long. The password you
enter will be the log-in password for the system administrator. The system
prompts you to confirm the password by retyping it.
7. Retype the password and press Enter. The system prompts for an access level.
8. Type and press Enter. This selects the administrator access level. The system
4
prompt appears.
9. Type
bye
10.Type
login
Enter. This verifies that the account exists.
11.Type
bye
Adding Users
Only an Administrator-level user can add new users to the SSU-2000e user list. You
can use ICS or TL1 commands.
Using ICS Commands
1. Connect a computer to an ICS port on the SSU-2000e and log in using an
Administrator-level user name and password, as described in
SSU-2000e, on page 102.
2. Type
USERS ADD
prompts for the new username.
3. Type in the new username, then press Enter. You can use up to 20 characters for
the username. The system prompts for the new user's password.
4. Type in the new user's password and press Enter. Passwords must have at least
one alphanumeric, one numeric, and one special (punctuation, for example)
character. The password can be up to 10 characters long. The system prompts
you to confirm the password by retyping it.
5. Type in the new user's password and press Enter. The system prompts for an
access level.
96 SSU-2000e User's Guide
and press Enter to log off the system.
followed by the administrator's user name and password and press
and press Enter to log off the system.
then press Enter to create a new user account. The system
Logging In to the
12713140-002-2 Revision E – October 2006