Basic System Load - Symmetricom SSU-2000e User Manual

Chapter 1 Product Overview
Communications Protocol
Table 1-7. Communications Module Software Versions

Basic System Load

Basic w/NTP Support
Basic w/SNMP v2 Support
Basic w/SNMP v2 and NTP Support
Basic w/SNMP v3 Support
Basic w/SNMP v3 and NTP Support
Basic System Load
The basic system load includes all TL1 and ICS support software. TL1 provides
command sets to support all operation, administration, maintenance, and provisioning
tasks required to maintain and control an SSU-2000e system. These tasks include
configuring and provisioning security, monitoring system performance, configuring
hardware, locating and handling faults, and performing equipment diagnosis and
testing. Refer to the SSU-2000e Technical Reference for more information.
ICS also provides command sets to support all operation, administration,
maintenance, and provisioning tasks required to maintain and control an
SSU-2000e system from a terminal connected to one of the serial ports. ICS
commands are designed in a more readable interface for users, and includes an
instructional help facility. Refer to the SSU-2000e Technical Reference for more
information.
Graphical User Interface
SynCraft is a software interface program that is available to provide monitoring and
configuration functionality in a Microsoft Windows graphical user interface. Contact
your Symmetricom Sales Representative for more information on the SynCraft
Graphical User Interface, part number 14113245-000-0. For more information on
control interfaces and the software commands available for each, see the
SSU-2000e Technical Reference.
46 SSU-2000e User's Guide
Version TL1 ICS NTP
X X
X X X
X X X
X X X
X X X
X X X
12713140-002-2 Revision E – October 2006
SNMP v2 SNMP v3
X
X
X X