Through Payload E1 And Ds1 Input Termination - Symmetricom SSU-2000e User Manual

Figure 2-8 shows the through payload E1 and DS1 input termination.
Figure 2-8.

Through Payload E1 and DS1 Input Termination

Each connector is associated with a specific input plug-in module slot.
describes the relationship between the connectors and the Input module slot
connectors. The signal connections on these connectors are set up in differential
pairs as Tip and Ring connections. Plugs are available for termination of input
reference.
Table 2-4. Input Module Slot to Connector Relationship
Slot Label Plug-in
(Name) Module Slot
INPUT-1 A3
INPUT-2 A4
INPUT-3 A5
12713140-002-2 Revision E – October 2006
Connector Reference Description
Module
Input Port
Monitor
1 J10
2 J13
3 J16
1 J19
2 J22
3 J25
1 J28
2 J31
3 J34
Chapter 2 Installing the SSU-2000e
Making Signal Connections
Table 2-4
Load Input
J11 J12
J14 J15
J17 J16
J20 J21
J23 J24
J26 J27
J29 J30
J32 J33
J35 J36
SSU-2000e User's Guide 69