Logging In With An Expired Password - Symmetricom SSU-2000e User Manual

M
;

Logging In with an Expired Password

Your password can expire after a preset number of days. This procedure illustrates
how to log in when the password assigned to you has expired. You can use either
ICS or TL1 commands, depending on the port you use.
Using ICS Commands
1. Connect a computer to a serial port on the SSU-2000e using the procedure in
Establishing a Connection With the
username appears.
2. Type your user name then press Enter. The system prompts for a password.
3. Type your password then press Enter. The following text appears:
pSOSystem (172.16.21.19)
Username: DAVID
Password:
Symmetricom Technical Support
1-888-367-7966 toll free USA
1-408-428-7907 worldwide
SSU_2000e, 2006-02-22T16:56:30
14313012-005-5, F.00, 02FEB06
PASSWORD EXPIRED AND NEED A NEW PASSWORD
4. Type a new password, and press Enter, then retype the password exactly as
before, then press Enter to confirm. The following text appears followed by the
system prompt, showing that you have access to the system.
New Password: **********
Confirm Pwd:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
NOTICE: THIS IS A PRIVATE COMPUTER SYSTEM.
UNAUTHORIZED ACCESS OR USE MAY LEAD TO PROSECUTION.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SSU_2000e->
You need to store the new password in a safe location to prevent a service call to
Symmetricom Global Services.
12713140-002-2 Revision E – October 2006
123 COMPLD
"\"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\""
"\"NOTICE: THIS IS A PRIVATE COMPUTER SYSTEM.
"\"UNAUTHORIZED ACCESS OR USE MAY LEAD TO PROSECUTION.\""
"\"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\""
**********
Chapter 3 Provisioning and Operating the SSU-2000e
SSU-2000e, on page 90. A prompt to enter a
DOY:53
Setting Security Parameters
\""
SSU-2000e User's Guide 103