Status Led Indicators - Symmetricom SSU-2000e User Manual

Status LED Indicators

The Composite Clock Output module status LED indicators are shown in
and described in
Figure 8-6. Front Panel of the Composite Clock Output Module
Table 8-5. Composite Clock Output Module Status LED Indicators
Indicator
POWER Green
STATUS Green/Amber
SOURCE A Green/Amber
SOURCE B Green/Amber
12713140-002-2 Revision E – October 2006
Table 8-5.
Color
On = +5 VDC power available on the Output module
Off = +5 VDC not present on the module
On (Green) = Module functioning correctly
Blinking Amber = Output module is downloading firmware
On (Amber) = Output module failure
On (Green) = Source A is the selected source clock
On (Amber) = Faulty or missing A source clock
Off = Source A is ignored or good and not selected
On (Green) = Source B is the selected source clock
On (Amber) = Faulty or missing B source clock
Off = Source B is ignored or good and not selected
Chapter 8 Output Module Reference Data
Composite Clock Output Module
Description
SSU-2000e User's Guide 199
Figure 8-6