Restoring The Configuration - Symmetricom SSU-2000e User Manual

Chapter 3 Provisioning and Operating the SSU-2000e

Restoring the Configuration

M
;
Restoring the Configuration
This section describes how to restore the configuration files in the SSU-2000e using
ICS and TL1 commands.
Using ICS Commands
1. Connect a computer to an ICS port on the SSU-2000e and log in using an
Administrator-level user name and password, as described in
SSU-2000e, on page 102.
2. Type
config restore ipaddr filename
IP address of the TFTP server that contains the backed-up file and
the name of the file.
An example command is:
config restore tftp://192.92.78.179/Symmetricom/backup/ssu2000e_July11_2006.bin
Using TL1 Commands
1. Connect a computer to port 2000 on the SSU-2000e and log in using an
Administrator-level user name and password, as described in
SSU-2000e, on page 102.
2. Type
CPY-MEM:::123::frommem,fromdev,,;
the configuration file and
system responds with text similar to the following:
"\"172.16.20.246, SSUCONFIG\""
M
;
116 SSU-2000e User's Guide
SSU_2000e 05-10-31 20:11:43
100 COMPLD
fromdev
"\"CONFIGURATION RESTORE, PLEASE WAIT\""
"\"1A01 DATA IS SAME AS STORED\""
"\"1A02 SIZE=5272, PASS\""
"\"1A06 SIZE=3072, PASS\""
"\"1A08 SIZE=1224, PASS\""
"\"1A10 SIZE=1224, FAIL\""
"\"1A12 DATA IS SAME AS STORED\""
SSU_2000e 05-10-31 20:12:26
100 COMPLD
and press Enter, where
where
frommem
is the IP address of the TFTP server. The
12713140-002-2 Revision E – October 2006
Logging In to the
is the
ipaddr
is
filename
Logging In to the
is the filename of