Symmetricom SSU-2000e User Manual page 61

Chapter 2 Installing the SSU-2000e
Rack Mounting the SSU-2000e
Clock Outputs, see Making Output Connections, on page 70
All SSU-2000e modules are equipped with card ejectors and plug in from the front
of the chassis. Each module is secured in the chassis with captive screws.
The SSU-2000e may be mounted in either a 300 mm or 600 mm deep equipment
cabinet. The SSU-2000e chassis occupies 500 mm vertically, 229 mm depth, and a
width of 431.8 mm. Included are 530 mm ETSI compatible rack mounting ears.
Optional 480 mm rack mounting ears are available for 480 mm EIA racks and
cabinets.
The front panel of the chassis mounts flush to the rack or at a distances of 25 mm
from the front of the rack. An SSU-2000e equipment cabinet mounting diagram is
shown in Figure 2-1.
12713140-002-2 Revision E – October 2006 SSU-2000e User's Guide 61