Performance Specifications - Symmetricom SSU-2000e User Manual

Table 8-15. RS-422 Output Module Status LED Indicators (Continued)
Indicator
SOURCE C Green/Amber
SOURCE D Green/Amber
OUTPUT FAULT Amber

Performance Specifications

Specifications for the RS-422 Output module are provided in
Table 8-16. RS-422 Output Module Performance Specifications
Performance
Characteristic
Frequency
Format/level
Waveshape
Rise/Fall time
Jitter
Number of Outputs
Software Options
The factory default setting and range for all RS-422 Output module software
parameters are listed in
Table 8-17. RS-422 Output Module Configuration
Configuration Setting
Port State
Min Clock
Framing
12713140-002-2 Revision E – October 2006
Color
On (Green) = Source C is the selected source clock
On (Amber) = Faulty or missing source C clock
Off = Source C is ignored or good and not selected
On (Green) = Source D is the selected source clock
On (Amber) = Faulty or missing source D clock
Off = Source D is ignored or good and not selected
On = Module has detected one or more faulty outputs
Off = All output signals are good
8 kHz to 4096 kHz, in 8 kHz increments
Ports 1–10: Per TIA/EIA-422V
Ports 11–20: TTL
Differential square wave, 50/50 duty cycle
Single-ended square wave, 50/50 duty cycle
< 50 ns
<0.03 UI up to 1.96 MHz
10 differential
10 single-ended
Table 8-16.
Factory Default
Disabled
Acquire
Not applicable
Chapter 8 Output Module Reference Data
RS-422 Output Module
Description
Table 8-12.
Specification
Range
Disabled/Enabled
Acquire/Lock
Not applicable
SSU-2000e User's Guide 221