Conventions Used In This Guide - Symmetricom SSU-2000e User Manual

Chapter, Title
Chapter 3, Provisioning and
Operating the SSU-2000e
Chapter 4, Commissioning the
SSU-2000e
Chapter 5, Maintenance and
Troubleshooting
Chapter 6, Clock Module
Reference Data
Chapter 7, Input Module
Reference Data
Chapter 8, Output Module
Reference Data
Chapter 9, Hardware
Configuration Guide
Index

Conventions Used in This Guide

This guide uses the following conventions:
Acronyms and Abbreviations – Terms are spelled out the first time they appear
in text. Thereafter, only the acronym or abbreviation is used.
Revision Control – The title page lists the printing date and versions of the
product this guide describes.
Typographical Conventions – This guide uses the typographical conventions
described in the table below.
When text appears
this way...
SSU-2000e User's Guide
SSU
CRITICAL
IOC1
Select File, Open...
12713140-002-2 Revision E – October 2006
Describes the ICS and TL1 commands required to provision the
SSU-2000e after installing the unit.
Provides checklist-based commissioning tests that should be
performed after completing turn-up and software configuration to
ensure the system is ready for normal operation.
Contains preventive and corrective maintenance, and
troubleshooting procedures for the product.
Provides detailed information on the Communications module and
the various Clock modules available for use in the SSU-2000e.
Contains detailed information on the Input modules available for
use in the SSU-2000e.
Describes the Output modules available for use in the SSU-2000e
and in the SDU-2000e.
Describes how to configure the SSU-2000e in several modes, and
lists part number for shelves, modules, and accessories.
Provides references to individual topics within this guide.
The title of a document.
An operating mode, alarm state, status, or chassis
label.
Click the Open option on the File menu.
How to Use This Guide
Description
... it means:
SSU-2000e User's Guide 15