Communicating By Serial Port; Direct Connection Using The Serial Port - Symmetricom SSU-2000 User Manual

Synchronization supply unit and synchronization distribution unit
Hide thumbs Also See for SSU-2000:
Table of Contents

Advertisement

Table 3-1. Communications Port Assignments (Continued)
Port #
23
This port is user selectable as either an ICS or a TL1
interface. The port defaults to ICS upon initialization
123
This port is designated for NTP only
161
This port is designated for SNMP Interactive
162
This port is designated for SNMP Trap transmission
2000
This port is designated for TL1 only

Communicating by Serial Port

Three EIA-232 ports are available on the SSU-2000. Attach a PC with terminal
emulation software to one of the ports as shown in
connecting to the local port on the front of the Communications module).
Figure 3-1.

Direct Connection Using the Serial Port

12713020-002-2 Revision F.01 – January 2007
Chapter 3 Provisioning and Operating the SSU-2000
Function
Ethernet Ports (Telnet)
Establishing a Connection With the SSU-2000
Protocol
ICS (Default), TL1
NTP
SNMP Interactive
SNMP Trap
TL1
Figure 3-1
(this example shows
SSU-2000 User's Guide
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdu-2000

Table of Contents