Symmetricom SSU-2000e User Manual page 231

Table 9-1. SSU-2000e System Components (Continued)
Item Description
20 Composite Clock Output
Module
21 RS-422 (Select Rate)
Module
22 E1/2048 Module
23 Adapter,
9-pin to wire-wrap
24 Clock Module Filler
Panel (8.1cm wide)
25 Standard Module Filler
Panel (1.5cm wide)
12713140-002-2 Revision E – October 2006
Part Number
23413158-000-0
23413287-000-0
23413292-000-0
Adapter and Blank Filler Panels
22013085-000-0
10913022-000-0
10913021-000-0
Chapter 9 Hardware Configuration Guide
SSU-2000e Configuration Chart
Notes
1. Installed in sets of two.
2. Each Output module pair provides 20
sets of summed output signals
(redundant configuration).
3. Maximum of 6 redundant output
modules can be installed in main shelf
(60 summed outputs).
4. Applications requiring more than 60
output clocks require SDU-2000e
Expansion Shelf (see
1. Installed in sets of two.
2. Each Output module pair provides 20
sets of summed output signals
(redundant configuration).
3. Maximum of 6 redundant output
modules can be installed in main shelf
(60 summed outputs).
4. Applications requiring more than 60
output clocks require SDU-2000e
Expansion Shelf (see
1. Installed in sets of two.
2. Each Output module pair provides 20
sets of summed output signals
(redundant configuration).
3. Maximum of 6 redundant output
modules can be installed in main shelf
(60 summed outputs).
4. Applications requiring more than 60
output clocks require SDU-2000e
Expansion Shelf (see
One DE9 I/O connector to wire wrap
adapter for each DE9 I/O connector
(optional).
Filler panels are required in all unused
clock slots.
Filler panels are required in all unused
SSU-2000e and SDU-2000e chassis
slots.The 1.5cm panel fits all unused slots
in Expansion Chassis and all except A1
and A12 (the two end slots) in the Main
chassis.
SSU-2000e User's Guide 231
Table 9-2).
Table 9-2).
Table 9-2).