E1/2048 Khz Output Module Status Indicators - Symmetricom SSU-2000e User Manual

E1/2048 kHz Output Module Status Indicators

The E1/2048 module has seven status indicators along the front edge of the module
that are used for visually conveying status information to the user. The LEDs are
shown in Figure 8-12
Figure 8-9. Front Panel of the E1/2048 kHz Output Module
Table 8-8. E1/2048 kHz Output Module Status LED Indicators
Indicator
POWER Green
STATUS Green/Amber
SOURCE A Green/Amber
SOURCE B Green/Amber
12713140-002-2 Revision E – October 2006
and described in
Color
On = +5 VDC power available on the Output module
Off = +5 VDC not present on the module
On (Green) = Output module functioning correctly
Blinking Amber = Output module is downloading firmware or
the module is disabled
On (Amber) = Output module failure
On (Green) = Source A is the selected source clock
On (Amber) = Faulty or missing A source clock
Off = Source A is good and not selected
On (Green) = Source B is the selected source clock
On (Amber) = Faulty or missing B source clock
Off = Source B is good and not selected
Chapter 8 Output Module Reference Data
Table 8-8.
Description
E1/2048 kHz Output Module
SSU-2000e User's Guide 207