Sdu-2000E System Components - Symmetricom SSU-2000e User Manual

Table 9-2. SDU-2000e System Components
Item
Description
No.
SDU-2000e Expansion Shelf and Associated Hardware
1 SDU-2000e Expansion
Shelf (Chassis)
2 Buffer Module
3 E1 Output Module
4 DS1 Output Module
5 2048 kHz Output
Module
12713140-002-2 Revision E – October 2006
Symmetricom
Part Number
25413141-000-0 1. Required for all expansion systems.
2. The
SDU Backup Clock Terminator
be moved from the SSU-2000e
chassis, connectors J8 and J9 to
connectors J105 and J106,
respectively, on the last expansion
chassis in the daisy chain.
3. Requires minimum of one Buffer
module (two required for
redundancy) and one or more
(maximum of ten) Output modules.
4. Unpopulated slots in the chassis
require a filler panel.
Buffer Module
23413122-000-0 One minimum required per SDU-2000e
expansion chassis; two required for
robust configuration.
Output Modules
23413018-000-0 1. Installed in sets of two.
2. Each Output module pair provides 20
sets of summed Output signals
(redundant configuration).
3. Maximum of 10 redundant Output
modules can be installed in
expansion shelf.
23413017-000-0 1. Installed in sets of two.
2. Each Output module pair provides 20
sets of summed output signals
(redundant configuration).
3. Maximum of 10 10 redundant Output
modules can be installed in
expansion shelf.
23413159-000-0 1. Installed in sets of two.
2. Each Output module pair provides 20
sets of summed output signals
(redundant configuration).
3. Maximum of 10 redundant Output
modules can be installed in
expansion shelf.
Chapter 9 Hardware Configuration Guide
SDU-2000e Configuration Chart
Notes
SSU Expansion Terminator
SSU-2000e User's Guide 233
and
must