Restoring The Configuration; Using Ics Commands; Using Tl1 Commands - Symmetricom SSU-2000 User Manual

M
;

Restoring the Configuration

This section describes how to restore the configuration files in the SSU-2000 using
ICS and TL1 commands.

Using ICS Commands

1. Connect a computer to an ICS port on the SSU-2000 and log in using an
Administrator-level user name and password, as described in
SSU-2000, on page 102.
2. Type
config restore ipaddr filename
IP address of the TFTP server that contains the backed-up file and
the name of the file.
An example command is:
config restore tftp://192.92.78.179/Symmetricom/backup/ssu2000e_July11_2006.bin

Using TL1 Commands

1. Connect a computer to port 2000 on the SSU-2000 and log in using an
Administrator-level user name and password, as described in
SSU-2000, on page 102.
2. Type
CPY-MEM:::123::frommem,fromdev,,;
the configuration file and
system responds with text similar to the following:
"\"172.16.20.246, SSUCONFIG\""
M
;
12713020-002-2 Revision F.01 – January 2007
SSU_2000 05-10-31 20:11:43
100 COMPLD
fromdev
"\"CONFIGURATION RESTORE, PLEASE WAIT\""
"\"1A01 DATA IS SAME AS STORED\""
"\"1A02 SIZE=5272, PASS\""
"\"1A06 SIZE=3072, PASS\""
"\"1A08 SIZE=1224, PASS\""
"\"1A10 SIZE=1224, FAIL\""
"\"1A12 DATA IS SAME AS STORED\""
SSU_2000 05-10-31 20:12:26
100 COMPLD
Chapter 3 Provisioning and Operating the SSU-2000
and press Enter, where
where
frommem
is the IP address of the TFTP server. The
Restoring the Configuration
Logging In to the
is the
ipaddr
is
filename
Logging In to the
is the filename of
SSU-2000 User's Guide 117